22 | Netstor
CLI Command
group - Set the PHY Group
sys - System Information
spin - Drive SpinUp Control
st - Store System Setting
lsd - List Devices Status
showlogs - Show the Current Logs
fld - File Download
• PASS Command
The pass command allows user to set or clear 6Gb/s SAS JBOD enclosure password
protection feature. Once the password has been set, the user can only monitor and access
6Gb/s SAS JBOD enclosure setting by providing the correct password. The password can
accept max. 8 chars and min. 4 chars. The manufacture default password is “0000”.
Syntax
CLI>pass [Enter]
Example:
CLI>pass
Old Password:****
New Password:****
Verify New Password:****
Password Changed But Not Save Permanently!
Note, use CLI command “st” to keep permanently.
• LO Command
To exit the selected 6Gb/s SAS JBOD enclosure CLI shell, use the lo command.
Syntax
CLI> lo [Enter]
Example:
CLI>lo
Password:
