34 | Netstor
CLI Command
• FAN Command
The fan command defines the speed of the four fans within the 6Gb/s SAS JBOD enclosure.
You are able to set the speed of fan on code between 1 and 7. Code 1 means the slowest
speed, and code 7 stands for the highest speed of fan. It is suggested that the speed of fan to
be set between codes 5 to 7 because as it is set under code 4, the system for the detection of
fan speed becomes sensitive and it will get to beep easily.
Syntax
CLI> fan [ speed code | speed code ] [Enter]
The speed of the four fans will be defined by the speed code you entered.
Example:
CLI> fan 7 7
The speed of the four fans will be set to the highest.
CLI> st
Save the configuration to the system.
Contacting Netstor Customer Service
The Netstor website at www.netstor.com.tw has technical updates, and the most
current product and support information. Please check our website for the latest
updates and online support files for helpful information. If further assistance is
needed, please contact us in one of the following ways:
Skype: netstor_fae
E-mail: [email protected]
Tel: +886-2-2917-1500
