SIP 60X User Manual
Page 36 of 43
Fax Tone
Detection Mode
Default is Callee. This decides whether Caller or Callee
sends out the re-INVITE for T.38 or Fax Pass Through.
Jitter Buffer Type
Select either Fixed or Adaptive based on network
conditions.
Jitter Buffer Length
Select Low, Medium or High based on network conditions.
Distinctive Ring tone
Custom Ring Tone 1 to 3 with associate Caller ID: when
selected, if Caller ID is configured, then the device will
ONLY uses this ring tone when the incoming call is from
the Caller ID. System Ring Tone is used for all other
calls. When selected but no Caller ID is configured, the
selected ring tone will be used for
all
incoming calls.
Disable Call Waiting
Default is
No
.
PROFILE PAGE DEFINITIONS
Setting Options
Meaning
Disable Call
Waiting Tone
Default is
No
. This is to disable the stutter Call Waiting
Tone when a Call Waiting call arrives.
The CWCID will still be displayed.
Ring Timeout
Incoming call will stop ringing when not picked up given a
specific period of time.
No Key Entry Timeout
Default is
4 seconds
.
Early Dial
Default is
No
. Use only if proxy supports 484 response.