SIP 60X User Manual
Page 41 of 43
7.8
Figure 4: Screen-Shot Of Save Configuration
Page
7.9
Rebooting From Remote
The administrator can remotely reboot the unit by pressing the “Reboot” button at the
bottom of the configuration menu. The user can re-login to the unit after waiting for about
30 seconds.
7.10
Figure 5: Screen-Shot of Rebooting Page
8 SOFTWARE UPGRADE
To upgrade software, SIP 60X can be configured with a TFTP server where the new code
image is located. The TFTP upgrade can work in either static IP or DHCP mode using
private or public IP address. It is recommended to set the TFTP server address in either a
public IP address or on the same LAN with the SIP 60X.
There are two ways to set up the TFTP server to upgrade the firmware, namely through
voice menu prompt or via the SIP 60X
‟s Web configuration interface. To configure the
TFTP server via voice prompt, follow section 5.1 with option 06, once set up the TFTP IP
