SIP 60X User Manual
Page 21 of 43
are finished.
4. Click
save set
after changing any setting and then
Re-boot
to confirm changes.
5. After reboot, check the Status Page to confirm the extensions are successfully
registered. You can now use your standard phones connected to ports FXS1 to FXS8 to
make calls.
7.3
Important Settings
The end-user must configure the following settings according to the local environment.
NOTE:
Most settings on the web configuration pages are set to the
default values.
7.3.1 NAT Settings
If you plan to keep the gateway within a private network behind a firewall, we recommend
using
STUN Server
. The following three (3) settings are useful in the STUN Server
scenario:
1.
STUN Server
(under Super Settings webpage)
Enter a STUN Server IP (or FQDN) that you may have, or look up a free public STUN
Server on the internet and enter it on this field. If using Public IP, keep this field blank.
2.
Use Random Ports
(under Super Settings webpage)
It really depends on your network settings, so set this parameter to Yes or No, whichever
works. Generally if you have multiple IP devices under the same network, it should be set
to Yes. If using a Public IP address, set this parameter to
No
.
3.
NAT Traversal
(under the Profile web pages)
Set this to
Yes
when gateway is behind firewall on a private network.
