SIP 60X User Manual
Page 18 of 43
played in the middle.
Detail see Direct IP Calling section on page 12.
*50
Disable Call Waiting
(for all-config change)
*51
Enable Call Waiting
(for all-config change)
*69
Call Return Service:
Dial *69 and the phone will dial the last
incoming phone number received.
*70
Disable Call Waiting
(Per Call)
*71
Enable Call Waiting
(Per Call)
*72
Unconditional Call Forward:
Dial
“*72” and then the forwarding
number followed by
“#”. Wait for dial tone and hang up. (dial tone
indicates successful forward)
*73
Cancel Unconditional Call Forward:
Dial
“*73” and wait for dial
tone, then hang up.
*74
Enable Paging Call:
Dial “*74” and then the destination phone
number you want to activate in Paging mode.
*78
Enable Do Not Disturb (DND):
When enabled all incoming calls will
be rejected.
*79
Disable Do Not Disturb (DND):
When disabled, incoming calls will
be accepted.
*87
Blind Transfer
*90
Busy Call Forward:
Dial
“*90” and then the forwarding number
followed by
“#”. Wait for dial tone then hang up.
*91
Cancel Busy Call Forward
:
Dial
“*91”. Wait for dial tone. Hang up.
*92
Delayed Call Forward:
Dial
“*92” and then the forwarding number
followed by
“#”. Wait for dial tone then hang up.
*93
Cancel Delayed Call Forward:
Dial
“*93” for a dial tone, then hang up.
Flash/Hook
If user hears call waiting beep, flash/hook will switch to the new
incoming call. Also used to switch to a new channel for a new call.
#
Pressing pound sign will serve as
Re-Dial
key.
7 CONFIGURATION GUIDE
7.1
Configuring SIP 60X via Voice Prompt
DHCP MODE
Select voice menu option 01 to enable SIP 60X to use DHCP.
