manualshive.com logo in svg

Netopia R7200, User Reference Manual

Introducing the Netopia R7200 - a versatile networking device designed to enhance your internet experience. Unlock its true potential by accessing the comprehensive User Reference Manual, available for free download from our website. This manual provides step-by-step instructions and essential information for optimizing the capabilities of your Netopia R7200.

Share
Download
background image

Line Backup   9-5

Connection Profiles

The line backup feature allows you to configure a complete connection profile for the backup por t, just as you 
do for your primar y WAN connection. In this way profiles are associated with a par ticular inter face. The profile 
should reflect the por t it is associated with. It should have switched characteristics for the backup por t.

For instructions on creating a connection profile see 

“Creating a new Connection Profile” on page 8-3

.

To associate this connection profile with your backup por t inter face, choose 

Backup

 from the Inter face Group 

pop-up menu and press Return.

Using Scheduled Connections with Backup

The backup link is a PPP dial-up connection and only connects to the Internet ser vice provider when traffic is 
initiated from the LAN. If you want to use the backup link to provide redundancy for ser vices, such as a web 
ser vice that you provide to the outside world, you must force the connection to stay up. You do this by creating 
a scheduled connection entr y that will be a permanent “forced up” connection for the backup por t. The backup 
por t will be activated upon primar y WAN link failure and remain active until primar y WAN link recover y.

To configure a Scheduled Connection, from the Main Menu select 

WAN Configuration

 and then 

Scheduled 

Connections

. 

                             Add Connection Profile

         Profile Name:                      Backup
         Profile Enabled:                   Yes

         Data Link Encapsulation is         PPP
         Data Link Options...

         IP Enabled:                        Yes
         IP Profile Parameters...

         IPX Enabled:                       No

         Interface Group...                 Backup
         Telco Options...

         ADD PROFILE NOW                    CANCEL

Return/Enter to discard changes you have made. Profile will not be added.
Configure a new Conn. Profile. Finished?  ADD or CANCEL to exit.

Scheduled

WAN Configuration

Main

Menu

Connections

Summary of Contents for R7200



































































































































































































































































Reviews:

No comments

Related manuals for R7200

CAME QBEMFSB2 User Manual preview
QBEMFSB2
Brand: CAME Pages: 19
I-O Wireless WBC11 User Manual preview
WBC11
Brand: I-O Wireless Pages: 55
Zonet ZSR4134WS User Manual preview
ZSR4134WS
Brand: Zonet Pages: 53
Ubiquiti PBE-5AC-300-ISO Quick Start Manual preview
PBE-5AC-300-ISO
Brand: Ubiquiti Pages: 28
Valcom VIP-822A Quick Start Manual preview
VIP-822A
Brand: Valcom Pages: 4
Network Critical SmartNA-X User Manual preview
SmartNA-X
Brand: Network Critical Pages: 200
hilscher netHOST NHST-T100 User Manua preview
netHOST NHST-T100
Brand: hilscher Pages: 75
National Instruments Monochrome Image Acquisition Device NI 1410 User Manual preview
Monochrome Image Acquisition Device NI 1410
Brand: National Instruments Pages: 34
Gigamon GigaVUE H TA100-CXP Hardware Installation Manual preview
GigaVUE H TA100-CXP
Brand: Gigamon Pages: 115
N-Tron 304TX-N Specifications preview
304TX-N
Brand: N-Tron Pages: 2
ATEN Altusen SN0100 Series User Manual preview
Altusen SN0100 Series
Brand: ATEN Pages: 178
CalAmp Sentry 4G 2500 User Manual preview
Sentry 4G 2500
Brand: CalAmp Pages: 52
Apposite Technologies Linktropy MINI-G User Manual preview
Linktropy MINI-G
Brand: Apposite Technologies Pages: 57
Linksys WRT330N - Wireless-N Gigabit Gaming Router Wireless User Manual preview
WRT330N - Wireless-N Gigabit Gaming Router Wireless
Brand: Linksys Pages: 92
LevelOne GNC-0112 Quick Installation Manual preview
GNC-0112
Brand: LevelOne Pages: 10
LAWO A_madi4 User Manual preview
A_madi4
Brand: LAWO Pages: 68
Atlantis Land A02-RA243-W54M Quick Start Manual preview
A02-RA243-W54M
Brand: Atlantis Land Pages: 85
Johnson Controls TR-9100-8001 Configuration Manual preview
TR-9100-8001
Brand: Johnson Controls Pages: 40

Brands by name

Popular brands

Load more brands