manualshive.com logo in svg

Netopia R7200, User Reference Manual

Introducing the Netopia R7200 - a versatile networking device designed to enhance your internet experience. Unlock its true potential by accessing the comprehensive User Reference Manual, available for free download from our website. This manual provides step-by-step instructions and essential information for optimizing the capabilities of your Netopia R7200.

Share
Download
background image

IPX Setup   11-5

7.

Select 

Default Gateway Address

 and enter the network address of the IPX network to which all packets of 

unknown destination address should be routed.

Note:

The default gateway address is usually set up to match the IPX Address in your network connection 

profile. 

8.

To configure filters and filter sets, select 

Filters and Filter Sets

 and go to the IPX filters and filter sets 

screens. For information on how to configure IPX filters and filter sets, see 

“IPX filters” on page 14-21

.

9.

Select 

IPX Wan Pool Base Address 

and enter the first IPX network address to be allocated to requesting 

IPX WAN clients. The base address you enter must not conflict with other IPX networks assigned to your IPX 
internet.

IPX routing tables

IPX routing tables provide information on current IPX routes and ser vices.

To go to the IPX Routing Table screen, select 

IPX Routing Table

 in the Statistics & Logs screen. This table 

shows detailed information about current IPX network routes.

To go to the IPX SAP Binder y Table screen, select 

IPX SAP Bindery Table

 in the Statistics & Logs screen. This 

table shows detailed information about available IPX ser vices and their location.

Main

Menu

• IPX Routing Table
• IPX SAP Binder y Table

Statistics & Logs

                                    IPX Routing Table

 Net Addr-Hops-Ticks-Type--Status-Interface--------------via Router------------
 -----------------------------------SCROLL UP----------------------------------
00000020   2      3 RIP   Active Ethernet          00000120:00000c465c2f
00000030   2     12 RIP   Active Ethernet          00000120:00000c465c2f
00000033   4     14 RIP   Active Ethernet          000000120:00000c465c2f
00000100   2      7 RIP   Active Ethernet          00000120:00000c465c2f
00000110   1      1 RIP   Active Ethernet          00000120:00000c465c2f

---------------------------------SCROLL DOWN-----------------------------
UPDATE

Summary of Contents for R7200



































































































































































































































































Reviews:

No comments

Related manuals for R7200

PACOM Professional Series Quick Manual preview
Professional Series
Brand: PACOM Pages: 15
Makita 3606 Parts Breakdown preview
3606
Brand: Makita Pages: 2
H3C S5120V3-EI Series Manual preview
S5120V3-EI Series
Brand: H3C Pages: 54
H3C CR16000-M Installation Manual preview
CR16000-M
Brand: H3C Pages: 116
WaiLan DeltaFire 500 User Manual preview
DeltaFire 500
Brand: WaiLan Pages: 27
Multitech MultiConnect SE MTS2EA Quick Start Manual preview
MultiConnect SE MTS2EA
Brand: Multitech Pages: 8
Belden HIRESCHMANN IT MAMMUTHUS MTM8003-FAN User Manual preview
HIRESCHMANN IT MAMMUTHUS MTM8003-FAN
Brand: Belden Pages: 84
ZyXEL Communications PK5000Z How To Configure preview
PK5000Z
Brand: ZyXEL Communications Pages: 3
ActionTec GE344000-01 User Manual preview
GE344000-01
Brand: ActionTec Pages: 87
Juniper EX4600 Hardware Manual preview
EX4600
Brand: Juniper Pages: 230
Ultra Fan Commander User Manual preview
Fan Commander
Brand: Ultra Pages: 4
Supero AOC-SIMLP-3+ User Manual preview
AOC-SIMLP-3+
Brand: Supero Pages: 66
Hama 62732 Operating Instructions Manual preview
62732
Brand: Hama Pages: 34
Billion BiPAC 7402VGO User Manual preview
BiPAC 7402VGO
Brand: Billion Pages: 157
RadioLabs O2Wind Instruction preview
O2Wind
Brand: RadioLabs Pages: 11
Johnson Controls Intelligent Fire Integrator 4WRMB Installation & Operation Manual preview
Intelligent Fire Integrator 4WRMB
Brand: Johnson Controls Pages: 70
Valcom VIP-814B Manual preview
VIP-814B
Brand: Valcom Pages: 4
Viking CPA-7B Application Note preview
CPA-7B
Brand: Viking Pages: 2

Brands by name

Popular brands

Load more brands