manualshive.com logo in svg

Netopia R7200, User Reference Manual

Introducing the Netopia R7200 - a versatile networking device designed to enhance your internet experience. Unlock its true potential by accessing the comprehensive User Reference Manual, available for free download from our website. This manual provides step-by-step instructions and essential information for optimizing the capabilities of your Netopia R7200.

Share
Download
background image

Utilities and Diagnostics   15-9

■

Select 

GET CONFIG FROM SERVER

 and press Return. You will see the following dialog box:

■

Select 

CANCEL

 to exit without downloading the file, or select 

CONTINUE

 to download the file. The system 

will reset at the end of the file transfer to put the new configuration into effect.

■

If you choose to download the configuration file, the 

TFTP Transfer State 

item

 

will change from 

Idle

 to 

Reading Config

. The 

TFTP Current Transfer Bytes

 item will reflect the number of bytes transferred.

Uploading configuration files

Using TFTP, you can send a file containing a snapshot of the router’s current configuration to a TFTP ser ver. The 
file can then be downloaded by a different Netopia R7200 unit to configure its parameters (see 

“Downloading 

configuration files” on page 15-8

). This is useful for configuring a number of routers with identical parameters or 

just for creating configuration backup files.

Uploading a file can also be useful for troubleshooting purposes. The uploaded configuration file can be tested 
on a different Netopia R7200 unit by Netopia or your network administrator.

To upload a configuration file, follow these steps:

1.

Select 

TFTP Server Name

 and enter the ser ver name or IP address of the TFTP ser ver you will use. The 

ser ver name or IP address is available from the site where the ser ver is located.

2.

Select 

Config File Name

 and enter a name for the file you will upload. The file will appear with the name you 

choose on the TFTP ser ver. You may need to enter a file path along with the file name (for example, 
Mypc/Netopia/myfile).

3.

Select 

SEND CONFIG TO SERVER

 and press Return. Netopia will begin to transfer the file.

4.

The 

TFTP Transfer State 

item

 

will change from 

Idle

 to 

Writing Config

. The 

TFTP Current Transfer Bytes

 

item will reflect the number of bytes transferred.

Transferring configuration and firmware files with XMODEM

You can transfer configuration and firmware files with XMODEM through the Netopia R7200’s console por t. Be 
sure your terminal emulation program suppor ts XMODEM file transfers.

To go to the 

X-Modem File Transfer

 screen, select it in the Utilities & Diagnostics menu.

Note:

 The X-Modem File Transfer screen is only available if you are connected via the Console por t.

             +-----------------------------------------------------------+
             +-----------------------------------------------------------+
             |                                                           |
             |    Are you sure you want to read the configuration now?   |
             |    The device will reset when the transfer is complete.   |
             |                                                           |
             |        CANCEL                        CONTINUE             |
             |                                                           |
             +-----------------------------------------------------------+

Summary of Contents for R7200



































































































































































































































































Reviews:

No comments

Related manuals for R7200

ZETR 25 Installation Manual preview
25
Brand: ZETR Pages: 2
CallDirect CD Series At Command Manual preview
CD Series
Brand: CallDirect Pages: 33
PaloAlto Networks ION 1200 Series Hardware Reference Manual preview
ION 1200 Series
Brand: PaloAlto Networks Pages: 90
Garderos R-7700 Series Operating Manual preview
R-7700 Series
Brand: Garderos Pages: 23
ICP DAS USA ZT-2024 Quick Start Manual preview
ZT-2024
Brand: ICP DAS USA Pages: 8
axing EOC 30-01 Quick Start Manual preview
EOC 30-01
Brand: axing Pages: 4
BinTec BIANCA/BRI Getting Started preview
BIANCA/BRI
Brand: BinTec Pages: 34
ivideon Bridge B1610 Quick Start Manual preview
Bridge B1610
Brand: ivideon Pages: 11
AIC SB302-LB User Manual preview
SB302-LB
Brand: AIC Pages: 101
Starbridge Networks ADSL Ethernet & USB Combo Router Lynx L-510 User Manual preview
ADSL Ethernet & USB Combo Router Lynx L-510
Brand: Starbridge Networks Pages: 59
Jensen of Scandinavia Air:Link 29150 Installation Manual preview
Air:Link 29150
Brand: Jensen of Scandinavia Pages: 2
Ubiquiti EdgePoint EP-R8 Quick Start Manual preview
EdgePoint EP-R8
Brand: Ubiquiti Pages: 22
Tripp Lite N002-007-BK Specification Sheet preview
N002-007-BK
Brand: Tripp Lite Pages: 3
G&D ControlCenter-IP 2.0 Installation Manual preview
ControlCenter-IP 2.0
Brand: G&D Pages: 60
Qlogic iSR6152 Quick Start Manual preview
iSR6152
Brand: Qlogic Pages: 12
Ubiquiti 3GStation Professional Quick Start Manual preview
3GStation Professional
Brand: Ubiquiti Pages: 24
Billion BiPAC 7404VGP Specifications preview
BiPAC 7404VGP
Brand: Billion Pages: 2
Extron electronics RGB 460xi FSR Series Installation Manual preview
RGB 460xi FSR Series
Brand: Extron electronics Pages: 9

Brands by name

Popular brands

Load more brands