manualshive.com logo in svg

Netopia R7200, User Reference Manual

Introducing the Netopia R7200 - a versatile networking device designed to enhance your internet experience. Unlock its true potential by accessing the comprehensive User Reference Manual, available for free download from our website. This manual provides step-by-step instructions and essential information for optimizing the capabilities of your Netopia R7200.

Share
Download
background image

Security   14-15

1.

To make the filter active in the filter set, select 

Enabled 

and toggle it to 

Yes

. If 

Enabled

 is toggled to 

No

, the 

filter can still exist in the filter set, but it will have no effect.

2.

If you want the filter to for ward packets that match its criteria to the destination IP address, select 

Forward

 

and toggle it to 

Yes

. If 

Forward

 is toggled to 

No

, packets matching the filter’s criteria will be discarded.

3.

Select 

Source IP Address

 and enter the source IP address this filter will match on. You can enter a subnet 

or a host address.

4.

Select 

Source IP Address Mask

 and enter a mask for the source IP address. This allows you to fur ther 

modify the way the filter will match on the source address. Enter 0.0.0.0 to force the filter to match on all 
source IP addresses, or enter 255.255.255.255 to match the source IP address exclusively.

5.

Select 

Dest. IP Address

 and enter the destination IP address this filter will match on. You can enter a 

subnet or a host address.

6.

Select 

Dest. IP Address Mask

 and enter a mask for the destination IP address. This allows you to fur ther 

modify the way the filter will match on the destination address. Enter 0.0.0.0 to force the filter to match on 
all destination IP addresses.

7.

Select 

Protocol Type

 and enter 

ICMP

, 

TCP

, 

UDP

, 

Any

, or the number of another IP transpor t protocol (see 

the table on 

page 14-9

).

Note:

If Protocol Type is set to TCP or UDP, the settings for por t comparison that you configure in steps 8 

and 9 will appear. These settings only take effect if the Protocol Type is TCP or UDP.

8.

Select 

Source Port Compare

 and choose a comparison method for the filter to use on a packet’s source 

por t number. Then select 

Source Port ID 

and enter the actual source por t number to match on (see the 

table on 

page 14-7

).

9.

Select 

Dest. Port Compare

 and choose a comparison method for the filter to use on a packet’s destination 

por t number. Then select 

Dest. Port ID 

and enter the actual destination por t number to match on (see the 

table on 

page 14-7

).

                                         Add Filter

                       Enabled:                    No
                       Forward:                    No

                       Source IP Address:          0.0.0.0
                       Source IP Address Mask:     0.0.0.0

                       Dest. IP Address:           0.0.0.0
                       Dest. IP Address Mask:      0.0.0.0

                       Protocol Type:              0

                       Source Port Compare...      No Compare
                       Source Port ID:             0
                       Dest. Port Compare...       No Compare
                       Dest. Port ID:              0

                       ADD THIS FILTER NOW         CANCEL

Enter the IP specific information for this filter.

Summary of Contents for R7200



































































































































































































































































Reviews:

No comments

Related manuals for R7200

3Com OfficeConnect 1600 Datasheet preview
OfficeConnect 1600
Brand: 3Com Pages: 8
3Com 3CRWEASY96A Quick Start Manual preview
3CRWEASY96A
Brand: 3Com Pages: 8
Nayar Systems GSR Manual preview
GSR
Brand: Nayar Systems Pages: 37
iDirect Evolution X3 Installation And Safety Manual preview
Evolution X3
Brand: iDirect Pages: 60
Zhone 6211 Product Manual preview
6211
Brand: Zhone Pages: 7
Zhone 6211 Quick Installation Instructions preview
6211
Brand: Zhone Pages: 1
Paradyne Comsphere 3510 User Manual preview
Comsphere 3510
Brand: Paradyne Pages: 85
Internet Security Systems Proventia A1204 User Manual preview
Proventia A1204
Brand: Internet Security Systems Pages: 42
Rabbit RabbitCore RCM4400W Product Manual preview
RabbitCore RCM4400W
Brand: Rabbit Pages: 126
4Home ControlPoint 2000 User Manual preview
ControlPoint 2000
Brand: 4Home Pages: 20
Selta Alyseo 106 User Manual preview
Alyseo 106
Brand: Selta Pages: 83
Westermo Ibex-RT-330-HV User Manual preview
Ibex-RT-330-HV
Brand: Westermo Pages: 34
Maipu SM3100-28TC-AC Install Manual preview
SM3100-28TC-AC
Brand: Maipu Pages: 19
Quidway S3000-EI Series Operation Manual preview
S3000-EI Series
Brand: Quidway Pages: 16
US Robotics uShare USR8710 User Manual preview
uShare USR8710
Brand: US Robotics Pages: 180
Alcatel-Lucent 9364 Installation And Commissioning Manual preview
9364
Brand: Alcatel-Lucent Pages: 60
Extreme Networks Summit WM3400 Installation Manual preview
Summit WM3400
Brand: Extreme Networks Pages: 51
Patton electronics IpLink 2884 Quick Start Manual preview
IpLink 2884
Brand: Patton electronics Pages: 8

Brands by name

Popular brands

Load more brands