manualshive.com logo in svg

Netopia R7200, User Reference Manual

Introducing the Netopia R7200 - a versatile networking device designed to enhance your internet experience. Unlock its true potential by accessing the comprehensive User Reference Manual, available for free download from our website. This manual provides step-by-step instructions and essential information for optimizing the capabilities of your Netopia R7200.

Share
Download
background image

Easy Setup   7-5

Easy Setup Profile

The Easy Setup Profile screen is where you configure the parameters that control the Netopia R7200’s 
connection to a specific remote destination, usually your ISP or a corporate site.

On a Netopia R7200 SDSL Router you can add up to 15 more connection profiles, for a total of 16, although 
you can only use one at a time.

1.

To enable address translation, toggle 

Address Translation Enabled

 to 

Yes

 (the default). For more 

information on Network Address Translation, see 

Chapter 10, “IP Setup and Network Address Translation,” 

on page 10-1

.

If you selected RFC1483 data link encapsulation in the SDSL Line Configuration screen, an 

IP Addressing

 

menu item appears allowing you to choose between Unnumbered and Numbered addressing. Numbered is 
the default for SDSL. It assigns a unique IP address to the SDSL WAN inter face, as required by most ISPs’ 
routers. Unnumbered may be used for simpler configurations such as point-to-point shor t haul applications.

2.

Select the editable field labeled 

Local WAN IP Address

.

The default address is 0.0.0.0, which allows for dynamic addressing, when your ISP assigns an address 
each time you connect. However, you can enter another specific address if you want to use static 
addressing. In that case, enter the local WAN address your ISP gave you. Press Return.

3.

If you selected PPP data link encapsulation in the SDSL Line Configuration screen, a PPP Authentication 
menu item appears. The authentication protocol and user name/password combinations you enter must 
be assigned or agreed to in advance between you and your ISP. Select 

PPP Authentication

 and press 

Return.

From the pop-up menu that appears, select the authentication method your ISP uses: PAP (Password 
Authentication Protocol), CHAP (Challenge Handshake Authentication Protocol), PAP-TOKEN, CACHE-TOKEN, 
or None.

■

PAP is the most common, and requires you to enter a User Name and Password in the next two fields.

                   Connection Profile 1: Easy Setup Profile

         Address Translation Enabled:       Yes

         Local WAN IP Address:              0.0.0.0

         Remote IP Address:                 127.0.0.2
         Remote IP Mask:                    255.255.255.255

         PPP Authentication...              PAP
         Send User Name:                    jarjar
         Send Password:                     binks

         PREVIOUS SCREEN                    NEXT SCREEN

Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes.
Enter basic information about your WAN connection with this screen.

Summary of Contents for R7200



































































































































































































































































Reviews:

No comments

Related manuals for R7200

G-Technology G-DRIVE ev ATC Product Manual preview
G-DRIVE ev ATC
Brand: G-Technology Pages: 35
Buffalo AirStation WZR-1166DHP Quick Setup Manual preview
AirStation WZR-1166DHP
Brand: Buffalo Pages: 2
Maipu SM3100-9TC-AC Install Manual preview
SM3100-9TC-AC
Brand: Maipu Pages: 26
Tenda DH301 User Manual preview
DH301
Brand: Tenda Pages: 120
WTI NPS-16HD20-1 User Manual preview
NPS-16HD20-1
Brand: WTI Pages: 178
Supero AOC-USAS-H8ir User Manual preview
AOC-USAS-H8ir
Brand: Supero Pages: 54
NCD Gen3 Ethernet Module Quick Start Manual preview
Gen3 Ethernet Module
Brand: NCD Pages: 18
3Com Router 3033 Configuration Manual preview
Router 3033
Brand: 3Com Pages: 63
Martin 90523000 User Manual preview
90523000
Brand: Martin Pages: 41
Weidmüller IE-SW-AL18M-16TX-2GC Hardware Installation Manual preview
IE-SW-AL18M-16TX-2GC
Brand: Weidmüller Pages: 2
Allied Telesis AR440S Hardware Reference Manual preview
AR440S
Brand: Allied Telesis Pages: 44
StarTech.com PCI555WG Instruction Manual preview
PCI555WG
Brand: StarTech.com Pages: 16
D-Link DSL-125 Quick Installation Manual preview
DSL-125
Brand: D-Link Pages: 12
Billion BiPAC 7401VGP User Manual preview
BiPAC 7401VGP
Brand: Billion Pages: 121
Linksys HPES03 User Manual preview
HPES03
Brand: Linksys Pages: 17
Magnescale MG80-EI Operating Manual preview
MG80-EI
Brand: Magnescale Pages: 73
Digi TransPort WR44 v2 Testing Manual preview
TransPort WR44 v2
Brand: Digi Pages: 32
Craftsman 315.175040 Owner'S Manual preview
315.175040
Brand: Craftsman Pages: 28

Brands by name

Popular brands

Load more brands