NBB-800
User Manual for NRSW version 4.5.0.100
Bootloader
The following bootloader parameters can be set:
Parameter
Bootloader Settings
Password
The password used to unlock the bootloader. If empty, the admin
password will be used.
Time & Region
This page can be used for setting the system time and configuring the time zone. You may further
enable daylight saving changes for your specific time zone. NetModule routers can synchronize their
system time by using one or more servers by the help of the Network Time Protocol (NTP) or via GNSS.
If enabled, the time synchronization is usually triggered after a WAN link has come up but before
starting any VPN connections. Further time synchronization cycles are scheduled in background.
Most routers don’t have a battery backed clock (RTC). In this case the system time is set during boot
to the last valide time, e.g. before power off.
NetModule Router Simulator
Hostname NB1600
Software Version 4.4.0.103
© 2004-2020, NetModule AG
System
Settings
Time & Region
Reboot
Authentication
User Accounts
Remote Authentication
Software Update
Software Update
Modem Firmware Update
Software Profiles
Configuration
File Configuration
Factory Configuration
Troubleshooting
Network Debugging
System Debugging
Tech Support
Keys & Certificates
Licensing
Legal Notice
System Time
Current system time:
2020-01-09 02:03:05
Set time
Time Synchronisation
Primary NTP server:
0.pool.ntp.org
Secondary NTP server:
1.pool.ntp.org
Preferred NTP server:
Primary NTP Server
Ping check:
enabled
Sync time from
GNSS:
Time Zone
Time zone:
UTC+01:00 Zurich
Daylight saving changes:
Apply Sync
HOME
INTERFACES
ROUTING
FIREWALL
VPN
SERVICES
SYSTEM
LOGOUT
Figure 5.56.: Regional settings
164
