NBB-800
User Manual for NRSW version 4.5.0.100
When running the serial port as AT modem emulator the following settings can be applied:
Parameter
Serial Port Settings
Physical protocol
Selects the desired physical protocol on the serial port
Baud rate
Specifies the baud rate run on the serial port
Hardware flow control
You may enable RTS/CTS hardware flow control, so that the RTS and
CTS lines are used to control the flow of data
Parameter
Incoming connections via Telnet
Port
The TCP port for the device server
Parameter
Phonebook Entries
Number
Phone number that will get an alias
IP address
IP address the number will become
Port
Port value for the IP address
71
