NBB-800
User Manual for NRSW version 4.5.0.100
Voice Routing
This page can be used to configure generic voice routing between the endpoints.
Enhanced routing facilities are provided via the SDK interface which is able to dispatch voice calls
based on their attributes (such as phone numer) and other system related status information (e.g.
number/duration of calls per endpoint, registration status and so on). Using the SDK, you can also
initiate or accept a call, adjust its volume level or do a hangup
Anyway, for simple scenarios the generic method should be sufficient and can be configured as follows:
Parameter
Voice Gateway Routing Settings
Source
Specifies the source endpoint (i.e. where the call comes in)
Mode
The type of action which shall be applied for the call: DROP will
silently hangup the call, ROUTE will route the call to the specified
endpoint.
Destination
Specfies the target endpoint (i.e. where to call is routed to)
160
