NetModule NB1800 User Manual Download Page 34

Page: 34 / 225

NBB-800
User Manual for NRSW version 4.5.0.100

power of the interface as well as the list of associated stations.

GNSS

This page displays the position status values, such as latitude/longitude, the satellites in view and more
details about the used satellites.

Ethernet

This page shows information about the Ethernet interfaces and packet statistics information.

LAN

This page shows information about the LAN interfaces plus the neighborhood information.

Bridges

This page shows information about configured virtual bridge devices.

Bluetooth

This page shows information about Bluetooth interfaces.

DHCP

This page offers details about any activated DHCP service, including a list of issued DHCP leases.

OpenVPN

This page provides information about the OpenVPN tunnel status.

IPSec

This page provides information about the IPsec tunnel status.

PPTP

This page provides information about the PPTP tunnel status.

GRE

This page provides information about the GRE tunnel status.

L2TP

This page provides information about the L2TP tunnel status.

MobileIP

This page provides information about Mobile IP connections.

Firewall

This page offers information about any firewall rules and their matching statistics. It can be used to
debug the firewall.

QoS

This page provides information about the used QoS queues.

BGP

This page provides information about the Border Gateway Protocol.

Summary of Contents for NB1800


































































































































































































































Search results

Summary of Contents for NB1800

Reviews:

Related manuals for NB1800

Brands by name

Popular brands

NetModule NB1800, User Manual

Search results

Summary of Contents for NB1800

Reviews:

Related manuals for NB1800

Brands by name

Popular brands