NetModule NB1800 User Manual Download Page 63

Page: 63 / 225

NBB-800
User Manual for NRSW version 4.5.0.100

5.3.5. Software Bridges

Software bridges can be used to bridge layer-2 devices like OpenVPN TAP, GRE or WLAN interfaces
without the need for a physical LAN interface.

Bridge Settings

This page can be used to enable/disable software bridges.

It can be configured as follows:

Parameter

Bridge Settings

Administrative status

Enables or disables the bridge interface. If you need an interface to
the local system you need to define an IP address for the local device.

IP Address

IP address of the local interface (available only if "Enabled with local
interface" was selected

Netmask

Netmask of the local interface (available only if "Enabled with local
interface" was selected

MTU

Optional MTU size for the local interface (available only if "Enabled
with local interface" was selected

Summary of Contents for NB1800


































































































































































































































Search results

Summary of Contents for NB1800

Reviews:

Related manuals for NB1800

Brands by name

Popular brands

NetModule NB1800, User Manual

Search results

Summary of Contents for NB1800

Reviews:

Related manuals for NB1800

Brands by name

Popular brands