Netio PowerCable Modbus 101 Series Manual Download Page 49

Page: 49 / 79

7. 3

M2M API Protocol – JSON (REST M2M API)

Available only in PowerCable REST 101x

Fi gur e 38 – JSON API pr ot ocol conf i gur at i on

Enable JSON API

Enables M2M JSON API f unct ions in t he syst em kernel.

Por t

Read-only value. Indicat es t he port where t he device current ly list ens
f or M2M JSON API commands.

Enable READ-ONLY

Enables

Read-Only

access via M2M JSON API f or monit oring. You may

also f ill in t he username and password f or t his mode.

Enable READ-WRIT E

Enables

Read/ Write

access f or monit oring and out put cont rol. You may

also f ill in t he username and password f or t his mode.

Username

Username f or t he respect ive access mode (Read-Only/ ReadWrit e).  Not e
– t his is unrelat ed t o t he username f or accessing t he PowerCable web
administ rat ion.  When lef t  empt y,  t he prot ocol will not  require any
aut hent icat ion.

Password

Password f or t he corresponding username (Read-Only/ ReadWrit e).

Save Changes

Saves t he changes.

Summary of Contents for PowerCable Modbus 101 Series
















































































Search results

Summary of Contents for PowerCable Modbus 101 Series

Reviews:

Related manuals for PowerCable Modbus 101 Series

Brands by name

Popular brands

Netio PowerCable Modbus 101 Series, Manual

Search results

Summary of Contents for PowerCable Modbus 101 Series

Reviews:

Related manuals for PowerCable Modbus 101 Series

Brands by name

Popular brands