NETGEAR ProSAFE GS105Ev2 User Manual Download Page 66

Page: 66 / 83

Manage and Monitor the Switch

ProSAFE Gigabit Web Managed (Plus) Switches

If the firmware release notice specifies that you must reconfigure the switch, save the switch
configuration settings.

For more information about how to save the switch configuration, see

Save the Switch

Configuration

on page 67.

Select

System > Maintenance > Firmware Upgrade

The Firmware Upgrade page displays.

Click the

BROWSE

button and locate and select the firmware file.

10.

Click the

APPLY

button.

WARNING:

To avoid the risk of corrupting the firmware, do not interrupt the
upgrade. For example, do not turn off the switch or disconnect it.

When the upgrade is complete, your switch restarts. The upgrade process typically takes
about three minutes.

Reboot the Switch

You can reboot the switch remotely.

Use Browser-Based Access to Reboot the Switch



To reboot the switch:

Connect your computer to the same network as the switch.

You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.

Launch a web browser.

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see

Access the Switch Using a Web

Browser

on page 7.

The login window opens.

Enter the switch’s password in the

password

field.

The switch’s default password is

password

The Switch Information page displays.

Select

System > Maintenance > Device Reboot

The Device Reboot page displays.

Summary of Contents for ProSAFE GS105Ev2




















































































Search results

Summary of Contents for ProSAFE GS105Ev2

Reviews:

Related manuals for ProSAFE GS105Ev2

Brands by name

Popular brands

NETGEAR ProSAFE GS105Ev2, User Manual

Search results

Summary of Contents for ProSAFE GS105Ev2

Reviews:

Related manuals for ProSAFE GS105Ev2

Brands by name

Popular brands