Optimize Performance With Quality of Service
29
ProSAFE Gigabit Web Managed (Plus) Switches
The previous figure is an example. Your switch might provide more or less ports. The
802.1p/DSCP-based
radio button is not supported on all models and therefore might not
show on the page.
9.
To set the port priority for one or more ports, do the following:
a.
Select one or more ports.
b.
In the
Priority
menu, select the priority.
c.
Click the
Apply
button.
Your settings are saved. The same priority is applied to all ports that you selected.
10.
To set a different port priority for one or more other ports, repeat
Use the ProSAFE Plus Utility to Configure Port-Based QoS
To configure port-based QoS:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2.
Double-click the
ProSAFE Plus Utility
icon.
The Switch Selection page displays a list of Web Managed (Plus) switches that it
discovers on the local network.
3.
Select the switch.
If you do not see the switch, click the
REFRESH
button.
4.
Click the
APPLY
button.
You are asked to enter the password for the switch.
5.
Enter the switch’s password in the
password
field.
The switch’s default password is
password
.
The Switch Status page displays.
6.
Select
QoS
.
The Quality of Service page displays.
7.
If this is the first time that you are setting up port-based QoS, select the
Port Based
radio
button and continue with
.
A pop-up window opens, informing you that the current QoS settings will be lost.
8.
Click the
Yes
button.
The pop-up window closes and the port priority options display.
