manualshive.com logo in svg

NETGEAR ProSAFE GS105Ev2, User Manual, Page: 64 / 83

Share
Download
NETGEAR ProSAFE GS105Ev2 User Manual Download Page 64

Manage and Monitor the Switch 

64

ProSAFE Gigabit Web Managed (Plus) Switches 

Upgrade the Firmware

You can check for the latest firmware version for your switch by visiting 

downloadcenter.netgear.com

, entering your product model number in the 

Enter a Product 

Name/Model Number

 field, and clicking the magnifying glass to search. 

Read the new firmware release notes to find out if you must reconfigure the switch after 
upgrading. The firmware upgrade method depends on the current firmware and boot loader 
versions on your switch.

Use Browser-Based Access to Upgrade the Firmware

To upgrade the firmware:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired network connection, or connect directly to a switch that is 
off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the Switch Using a Web 

Browser 

on page 7.

The login window opens.

4. 

Enter the switch’s password in the 

password

 field.

The switch’s default password is 

password

.

The Switch Information page displays.

5. 

Select 

System > Maintenance > Firmware Upgrade

.

The Firmware Upgrade page displays.

6. 

If the page displays the 

Enter Loader Mode

 button, click the 

Enter Loader Mode

 button.

The switch reboots and enters into the loader mode. The Firmware Upgrade page that 
displays varies, depending on the firmware boot loader version that is already on your 
switch.

Follow either 

Step 7

 or 

Step 8

, depending on which prompts you are presented with.

7. 

If you are prompted to upgrade the firmware from a file, click the 

Browse

 button and locate 

and select the new firmware image file.

8. 

If you are prompted to provide both the TFTP server IP address and the image file name, do 
the following:

a.

Complete the 

TFTP Server IP

 address field.

Summary of Contents for ProSAFE GS105Ev2




















































































Reviews:

No comments