manualshive.com logo in svg

NETGEAR ProSAFE GS105Ev2, User Manual

Share
Download
NETGEAR ProSAFE GS105Ev2 User Manual Download Page 83

83

A

A.   

Factory Default Settings

You can return the switch to its factory settings. Use the end of a paper clip or some other similar 
object to press and hold the 

Factory Defaults

 button on the front panel of the switch for at least 

two seconds. The switch resets and returns to the factory settings that are shown in the following 
table.

Table 1.  Factory default settings

Feature

Setting

Switch password

password

IP address

192.168.0.239 (if the switch is not connected to a network with a DHCP server)

Subnet mask

255.255.255.0

DHCP mode

Enabled

IGMP snooping

Enabled

LAGs

None configured

VLANs

Disabled. If enabled, by default, all ports are members of VLAN 1.

802.1p/DSCP-based QoS

Enabled

Port-based QoS

Disabled

Rate limiting

Disabled

Broadcast filtering

Disabled

Loop detection

Disabled

Port speed

Auto-negotiation

Flow control

Disabled

Port mirroring

Disabled

Summary of Contents for ProSAFE GS105Ev2




















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands