manualshive.com logo in svg

NETGEAR ProSAFE GS105Ev2, User Manual

Share
Download
NETGEAR ProSAFE GS105Ev2 User Manual Download Page 28

Optimize Performance With Quality of Service 

28

ProSAFE Gigabit Web Managed (Plus) Switches 

Use Browser-Based Access to Configure Port-Based QoS

To configure port-based QoS:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired network connection, or connect directly to a switch that is 
off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the Switch Using a Web 

Browser 

on page 7.

The login window opens.

4. 

Enter the switch’s password in the 

password

 field.

The switch’s default password is 

password

.

The Switch Information page displays.

5. 

Select 

QoS

.

The Quality of Service page displays.

6. 

If this is the first time that you are setting up port-based QoS, select the 

Port-based

 radio 

button and continue with 

Step 7

. 

Otherwise, see 

Step 9

.

A pop-up window opens, informing you that the current QoS settings will be lost.

7. 

Click the 

OK

 button.

The pop-up window closes.

8. 

Click the 

Apply

 button.

Your settings are saved and the Port Priority table displays.

Summary of Contents for ProSAFE GS105Ev2




















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands