NETGEAR Orbi, User Manual

Page: 9 / 124

Overview
9
Orbi High-Performance AC3000 Tri-band WiFi System
LED Behavior
The Orbi kit comes with a router and a satellite. You can also purchase Add-On Orbi
Satellites (sold separately). When you sync a satellite to the router, the LED behavior for a
Satellite that comes in a kit is different from the LED behavior for add-on satellites.
Orbi Kit LEDs
The following table describes the LED behavior for an Orbi router and Orbi satellite that are
purchased together and come in the same kit.
Table 1. Orbi kit router and satellite LED descriptions
LED LED Behavior
Power The Power LED is located above the Power On/Off button on the rear
panel.
• Solid green .Power is on.
• Solid amber . The router or satellite is booting.
• Blinking amber . Resetting to factory default settings.
• Blinking red . The firmware is corrupted.
• Off . Power is not supplied.
Router ring The ring LED is located on the top.
• Pulsing white . The router is booting or someone pressed the Sync
button.
• Off . The router finished booting and is working normally.
• Solid white . The router is resetting to factory default settings.
• Solid magenta . The router cannot connect to the Internet. See Cannot
Access the Internet on page 115.
Satellite ring This satellite is included when you buy an Orbi router. The ring LED is
located on the top.
• Pulsing white . The satellite is booting.
• Blue for 3 minutes . The connection between the satellite and the
router is good.
• Amber for 3 minutes . The connection between the satellite and the
router is fair.
• Magenta . The satellite failed to sync to the router. See The Router and
Satellite Do Not Sync on page 114.
• Off . The satellite synced to the router and is working normally.