NETGEAR Nighthawk R7000P User Manual Download Page 9

Page: 9 / 155

Unpack Your Router

Your package contains the Nighthawk AC2300 Smart WiFi Router, the power adapter, and a yellow Ethernet
cable.

Figure 1. Package contents

Attach the Antennas

The router comes with three antennas.

To attach the antennas:

Remove the antenna caps from the antenna posts on the router.

Align the antennas with the antenna posts on the router.

Attach the antennas on the threaded antenna posts.

Position the antennas for the best WiFi performance.

We recommend that the center antenna be vertical and that you aim the others outward at 45-degree
angles, as shown.

Hardware Setup

Nighthawk AC2300 Smart WiFi Router

Summary of Contents for Nighthawk R7000P




























































































































































Search results

Summary of Contents for Nighthawk R7000P

Reviews:

Related manuals for Nighthawk R7000P

Brands by name

Popular brands

NETGEAR Nighthawk R7000P, User Manual

Search results

Summary of Contents for Nighthawk R7000P

Reviews:

Related manuals for Nighthawk R7000P

Brands by name

Popular brands