NETGEAR Nighthawk R7000P User Manual Download Page 14

Page: 14 / 155

Cable Your Router

Power on your router and connect it to a modem.

Figure 4. Cable your router

To cable your router:

Unplug your modem’s power, leaving the modem connected to the wall jack for your Internet service.

If your modem uses a battery backup, remove the battery.

Plug in and turn on your modem.

If your modem uses a battery backup, put the battery back in.

Connect your modem to the Internet port of your router with the yellow Ethernet cable that came with
your router.

Connect the power adapter to your router and plug the power adapter into an outlet.

Press the Power On/Off button on the rear panel of the router.

Disable or Enable LED Blinking or Turn Off LEDs

To disable LED blinking or turn off the LEDs using the router’s web interface:

Launch a web browser from a computer or mobile device that is connected to the network.

Enter http://www.routerlogin.net in the address field.

A login window opens.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

Select ADVANCED > Advanced Setup > LED Control Settings.

The LED Control Settings page displays.

Select an LED control setting:

Hardware Setup

Nighthawk AC2300 Smart WiFi Router

Summary of Contents for Nighthawk R7000P




























































































































































Search results

Summary of Contents for Nighthawk R7000P

Reviews:

Related manuals for Nighthawk R7000P

Brands by name

Popular brands

NETGEAR Nighthawk R7000P, User Manual

Search results

Summary of Contents for Nighthawk R7000P

Reviews:

Related manuals for Nighthawk R7000P

Brands by name

Popular brands