NETGEAR Nighthawk R7000P User Manual Download

Page: 102 / 155

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

Select ADVANCED > NETGEAR Downloader (BETA) > Downloader Settings.

The NETGEAR Downloader Settings page displays.

Click the Configure Email button.

The E-mail page displays.

Select the Send E-mail notifications when a downloader task is finished check box.

Click the Apply button.

Your settings are saved.

Manage NETGEAR Downloader Tasks

To manage NETGEAR Downloader tasks:

Launch a web browser from a computer or mobile device that is connected to the network.

Enter http://www.routerlogin.net.

A login window opens.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

Select ADVANCED > NETGEAR Downloader (BETA) > Download Manager.

The NETGEAR Downloader Settings page displays.

Make any needed changes.

Click the Apply button.

Your settings are saved.

Safely Remove a USB Storage Device

Before you physically disconnect a USB storage device from the router USB port, log in to the router and
take the USB storage device offline.

To remove a USB storage device safely:

Launch a web browser from a computer or mobile device that is connected to the network.

Enterhttp://www.routerlogin.net.

A login window opens.

Enter the router user name and password.

Share USB Storage Devices Attached to the Router

102

Nighthawk AC2300 Smart WiFi Router

Summary of Contents for Nighthawk R7000P




























































































































































Search results

Summary of Contents for Nighthawk R7000P

Reviews:

Related manuals for Nighthawk R7000P

Brands by name

Popular brands

NETGEAR Nighthawk R7000P, User Manual

Search results

Summary of Contents for Nighthawk R7000P

Reviews:

Related manuals for Nighthawk R7000P

Brands by name

Popular brands