NETGEAR Nighthawk R7000P User Manual Download

Page: 11 / 155

Table 1. LED descriptions (Continued)

Description

LED

•

Solid white. The 2.4 GHz WiFi radio is operating.

•

Blinking. The router is sending or receiving WiFi traffic.

•

Off. The 2.4 GHz WiFi radio is off.

2.4 GHz WiFi

•

Solid white. The 5 GHz WiFi radio is operating.

•

Blinking. The router is sending or receiving WiFi traffic.

•

Off. The 5 GHz WiFi radio is off.

5 GHz WiFi

•

Solid white. A USB device is connected and is ready.

•

Blinking. A USB device is plugged in and is trying to connect.

•

Off. No USB device is connected, or someone clicked the Safely Remove Hardware button
and it is now safe to remove the attached USB device.

USB 3.0 port 1 and USB 2.0
port 2

The LED color indicates the speed: white for Gigabit Ethernet connections and amber for 100
Mbps or 10 Mbps Ethernet connections.

•

Solid. A powered-on device is connected to the Ethernet port.

•

Blinking. The port is sending or receiving traffic.

•

Off. No device is connected to this Ethernet port.

Ethernet ports 1–4

Hardware Setup

Nighthawk AC2300 Smart WiFi Router

Summary of Contents for Nighthawk R7000P




























































































































































Search results

Summary of Contents for Nighthawk R7000P

Reviews:

Related manuals for Nighthawk R7000P

Brands by name

Popular brands

NETGEAR Nighthawk R7000P, User Manual

Search results

Summary of Contents for Nighthawk R7000P

Reviews:

Related manuals for Nighthawk R7000P

Brands by name

Popular brands