NETGEAR Nighthawk R7000P User Manual Download

Page: 129 / 155

14.

To specify the destination folder, click the Browse button and select a destination folder.

15.

Click the Install button.

The window displays the progress of the installation and then displays the final installation page.

16.

Click the Finish button.

17.

Unzip the configuration files that you downloaded and copy them to the folder where the VPN client is
installed on your device.

For a client device with Windows 64-bit system, the VPN client is installed at

C:\Program

files\OpenVPN\config\

by default.

18.

For a client device with Windows, modify the VPN interface name to NETGEAR-VPN:

On your computer, go to the Networks page. If you are using Windows 10, select Control Panel >
Network and Sharing Center > Change adapter settings.

In the local area connection list, find the local area connection with the device name TAP-Windows
Adapter.

Select the local area connection and change its name (not its device name) to NETGEAR-VPN.

If you do not change the VPN interface name, the VPN tunnel connection will fail.

Use VPN to Access Your Network

129

Nighthawk AC2300 Smart WiFi Router

Summary of Contents for Nighthawk R7000P




























































































































































Search results

Summary of Contents for Nighthawk R7000P

Reviews:

Related manuals for Nighthawk R7000P

Brands by name

Popular brands

NETGEAR Nighthawk R7000P, User Manual

Search results

Summary of Contents for Nighthawk R7000P

Reviews:

Related manuals for Nighthawk R7000P

Brands by name

Popular brands