NETGEAR Nighthawk R7000P User Manual Download Page 116

Page: 116 / 155

Select ADVANCED > USB Functions > ReadySHARE Storage.

The USB Storage (Advanced Settings) page displays.

Click the Media Server tab.

The Media Server (Settings) page displays.

Make sure that the Enable TiVo support check box is selected.

If you changed the settings, click the Apply button.

Your settings are saved.

Play Videos on TiVo

To play videos:

On the TiVo, select TiVo Central > My Shows.

Go to the bottom of the list and select the router model.

Play Music or View Photos on TiVo

To play music or view photos:

On the TiVo, select TiVo Central > Music, Photos, & Showcases.

Select an item to play or watch.

Use the Router as a Media Server

116

Nighthawk AC2300 Smart WiFi Router

Summary of Contents for Nighthawk R7000P




























































































































































Search results

Summary of Contents for Nighthawk R7000P

Reviews:

Related manuals for Nighthawk R7000P

Brands by name

Popular brands

NETGEAR Nighthawk R7000P, User Manual

Search results

Summary of Contents for Nighthawk R7000P

Reviews:

Related manuals for Nighthawk R7000P

Brands by name

Popular brands