NETGEAR JR6150 User Manual Download

Page: 93 / 159

Administration

A750 Wireless Dual Band Gigabit Router JR6150

Click the

ADVANCED

tab.

The following information displays:

•

Hardware Version

. The router model.

•

Firmware Version

. The version of the router firmware. It changes if you upgrade the

router firmware.

•

GUI Language Version

. The localized language of the router user interface.

•

LAN Port

MAC Address

. The Media Access Control address for the LAN port. This address

is the unique physical address that the Ethernet (LAN) port of the router uses.

IP Address

. The IP address that the Ethernet (LAN) port of the router uses. The

default is 192.168.1.1.

DHCP Server

. Identifies whether the router’s built-in DHCP server is active for the

LAN-attached devices.

Internet Port Pane



To display the Internet Port pane:

For more information, see

Use NETGEAR genie after Installation

on page

17.

Summary of Contents for JR6150
































































































































































Search results

Summary of Contents for JR6150

Reviews:

Related manuals for JR6150

Brands by name

Popular brands

NETGEAR JR6150, User Manual

Search results

Summary of Contents for JR6150

Reviews:

Related manuals for JR6150

Brands by name

Popular brands