manualshive.com logo in svg

NETGEAR JR6150, User Manual

Share
Download
NETGEAR JR6150 User Manual Download Page 27

genie BASIC Settings

27

 A750 Wireless Dual Band Gigabit Router JR6150

This setting is the wireless channel used by the gateway. For the 2.4 GHz band, select 
either 

Auto

 or a value from 

1

 through 

13

. For products in the North America market, only 

Channels 1 through 11 can be operated. Do not change the channel unless you 
experience interference (shown by lost connections or slow data transfers). If this 
happens, experiment with different channels to see which is the best. The default setting 
is 

Auto

, which means that the router selects a channel automatically.

Note:

 

When you use multiple access points, it is better if adjacent access 

points use different channels to reduce interference. In the 2.4 GHz band, the 

recommended channel spacing between adjacent access points is five 

channels (for example, use Channels 1 and 6, or 6 and 11).

6.

Select the mode from the 

Mode

 list.

Up to 300 Mbps

 is the default setting. 

Up to 54 Mbps

 supports 802.11g and 11b wireless 

devices. The 

Up to 145 Mbps

 setting allows 802.11n devices to connect at this speed.

7.

To enable SSID broadcast, select the 

Enable SSID Broadcast

 check box.

This feature allows the router to broadcast its SSID so wireless stations can see this 
wireless name (SSID) in their scanned network lists. This check box is selected by 
default, but you can clear it to disable broadcast of the SSID.

8.

To enable wireless isolation, select the 

Enable Wireless Isolation

 check box.

This feature allows wireless clients (computers or wireless devices) that join the network 
to use the Internet, but they cannot access each other or access Ethernet devices on the 
network.

9.

Specify the security option.

You can change the wireless authentication and encryption option and the password 
(also referred to as the wireless network password or network key). The security that you 
select encrypts data transmissions and ensures that only trusted devices receive 
authorization to connect to your network.

WARNING:

NETGEAR recommends that you do not change the wireless 
security option or the password. Do not disable wireless security!

Set up the security options as discussed in the following sections:

•

For information about how to set up WPA-PSK, WPA2-PSK, or WPA-PSK + 
WPA2-PSK mixed mode security, see 

WPA-PSK, WPA2-PSK, and WPA-PSK + 

WPA2-PSK Mixed Mode 

on page

 

28.

•

For information about how to set up WPA/WPA2 enterprise security, see 

WPA/WPA2 

Enterprise 

on page

 

29.

•

For information about how to set up WEP security, see 

WEP 

on page

 

30.

Summary of Contents for JR6150
































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands