NETGEAR JR6150 User Manual Download

Page: 38 / 159

genie BASIC Settings

A750 Wireless Dual Band Gigabit Router JR6150

FastLane

FastLane lets you reserve bandwidth when you are connecting from a trusted IP address.
You can also specify whether the

WPS/FastLane

button on the router is used for WPS or

FastLane. FastLane gives you guaranteed bandwidth for video streaming applications.

You can do the following:

•

Turn on and off the FastLane feature. (FastLane is set to off by default.)

•

Specify the IP address of the trusted computer.

•

Set the

WPS/FastLane

button on your router to WPS or FastLane. (This button is set to

WPS by default.)



To use FastLane:

For more information, see

Use NETGEAR genie after Installation

on page

17.

Select

BASIC > FastLane

To enable FastLane, select the

Turn On FastLane

check box.

In the field provided, enter the IP address of the trusted computer.

When you connect to the router from the trusted IP address, you have guaranteed
bandwidth for video streaming applications.

To specify FastLane for the

WPS/FastLane

button, select the

FastLane

radio button.

Click the

Apply

button.

Summary of Contents for JR6150
































































































































































Search results

Summary of Contents for JR6150

Reviews:

Related manuals for JR6150

Brands by name

Popular brands

NETGEAR JR6150, User Manual

Search results

Summary of Contents for JR6150

Reviews:

Related manuals for JR6150

Brands by name

Popular brands