NETGEAR FSM726 - ProSafe Managed Switch, Setup Manual

Page: 92 / 156

700 Series Software Manual v2.1
5-42 Web-Based Management Interface
The SNMP Host Table screen allows you to add and remove hosts from access rights that have
been granted to community groups. The permissions GET, SET and TRAP are assigned to a
community name and then these permissions are assigned to individual machines by adding those
machines and their IP address to the appropriate community string. Host Authorization can be
Enabled or Disabled.
Host Authorization is a security feature to limit people who are not listed in the host table from
accessing the switch using SNMP.
Advanced> SNMP> Trap Setting
Figure 5-44: Figure 4-33. SNMP Management > Trap Settings
With authentication traps enabled, the system generates a SNMP trap when a host authorization
fails. Hosts in community strings with TRAP privileges are notified when a trap occurs.