NETGEAR FSM726 - ProSafe Managed Switch, Setup Manual

Page: 117 / 156

700 Series Software Manual v2.1
Command Line Interface 6-25
FSM726(config)# snmp-server name <switch name>
Where
<switch name>
= the name you wantwant to give to the switch
Host
The
host
command is used to specify hosts to receive SNMP notifications.
Syntax
FSM726(config)# snmp-server host <host name> <host IP address> <community string>
Where
<host name>
= the name of the host that is to receive SNMP notifications.
<host IP address>
= The IP address of the host specified
<community string>
= the community which the host belongs to
Host Authorization
The
host-authorization
command enables SNMP host authorization.
Syntax
FSM726(config)# snmp-server host-authorization
Trap
The
trap
command enables SNMP trap. s IP is not in the SNMP host table.
Syntax
FSM726(config)# snmp-server trap