NETGEAR FSM726 - ProSafe Managed Switch, Setup Manual

Page: 54 / 156

700 Series Software Manual v2.1
5-4 Web-Based Management Interface
These parameters are not editable from this screen. Some of these can be modified in the Set Up>
System Configuration page or the Set Up> IP Configuration page.
Status Menus
The Status page contains the following menu choices:
Figure 5-3: Status Menu navigation
• “Status > Switch Statistics” on page 4-5
• “Status > Port Statistics” on page 4-7
• “Status > Error Statistics” on page 4-8
• “Status > Most Active Ports” on page 4-9
• “Status > Reset Statistics” on page 4-10
• “Status > Port Settings” on page 4-10
• “Status > MAC Address Table” on page 4-11
Each of these menus is covered in the following sections.