NETGEAR FSM726 - ProSafe Managed Switch, Setup Manual

Page: 125 / 156

700 Series Software Manual v2.1
Command Line Interface 6-33
Syntax
FSM726(config)# system radius authen-mode [local | local-then-remote | remote]
Where
Local
= authentication is performed locally and not through an external RADIUS server
Local-then-remote
= Authentication is performed locally first, then by an external RADIUS
server
Remote
= Authentication is performed by a remote server and not locally.
• Server-IP
The
Server-IP
command is used to set the IP address of the RADIUS server
Syntax
FSM726(config)# system radius server-ip <IP-address>
Where
<IP address>
= IP address of the RADIUS server
• Shared-Secret
The
shared-secret
command lets you set the RADIUS shared secret
Syntax
FSM726(config)# system radius shared-secret <shared secret>
Where
<shared secret>
= the RADIUS shared secret
Reset
Use the reset command to reboot the switch.
Syntax
FSM726(config)# system reset