NETGEAR FSM726 - ProSafe Managed Switch, Setup Manual

Page: 111 / 156

700 Series Software Manual v2.1
Command Line Interface 6-19
FSM726(config-if)# Shutdown
Spanning Tree
The
spanning-tree
command lets you configure the variables of the port that affects its
spanning-tree operation, items such as port cost and priority is configured through this command.
Syntax
FSM726(config-if)# spanning-tree [cost <1-65535> | port-priority <0-255> | fastlink ]
Where
Cost <1-65535>
= the cost of the port, ranges from 1-65535
port-priority <0-255>
= the priority of the port, ranges from 0-255
fastlink
= enables Fastlink, a mode that bypasses the listening & learning phase of Spanning
Tree
Speed
Syntax
FSM726(config-if)# speed <speed>
Where
<speed>
= the speed of the port. The options are 10, 100, 1000, or auto (for automatic speed
configuration).
Switchport
The
switchport
command lets you configure VLAN access mode of this particular port.
• VLAN
syntax
FSM726(config-if)# switchport access vlan [tagged <VLAN Membership> | untagged <VLAN
membership>]
Where: