NETGEAR FSM726 - ProSafe Managed Switch, Setup Manual

Page: 104 / 156

700 Series Software Manual v2.1
6-12 Command Line Interface
---- -------------------------------- --------- -------------------------------
1 Netgear
active Untagged:
Fa1/4,Fa1/5,Fa1/7,Fa1/11,
Fa1/12,Fa1/13,Fa1/14,Fa1/15,
Fa1/19,Fa1/20,Fa1/21,Fa1/22,
Fa1/23
3 Company active
Tagged:
Gi1/25, Gi1/26
VLAN
The
show vlan
command displays information on membership of individual VLANs.
Syntax
FSM726# show vlan [cr | VLAN index #]
Where
<cr>
= a carriage return. The command show vlan lists the VLANs configured on the switch.
<VLAN index #>
= The VLAN ID. Adding the VLAN ID to the show vlan command displays
the port that belongs to that particular VLAN. For example, show vlan 1 displays the ports that
belong to VLAN 1.
An example of the display output is shown below:.
Untagged port members: 4,5,7,11-15,19-23
Tagged port members: none
COS-PVID
The
show vlan cos-pvid
displays the PVIDs and the CoS settings of each port.
Syntax
FSM726# show vlan cos-pvid
An example of the display output is shown below:
Port PVID Priority
------------------------
1:1 1 Normal
1:2 1 Normal