Chapter 7: Maintenance
|
223
FS728TP Smart Switch Software Administration Manual
File Management
The system maintains two versions of the FS728TP software in permanent storage. One
image is the active image, and the second image is the backup image. The active image is
loaded during subsequent switch restarts. This feature reduces switch down time when
upgrading or downgrading the FS728TP software.
The
File Management
menu contains links to the following options:
•
Dual Image Configuration
on page
223
•
Dual Image Status
on page
224
Dual Image Configuration
The system running a legacy software version will ignore (not load) a configuration file
created by the newer software version. When a configuration file created by the newer
software version is discovered by the system running an older version of the software, the
system will display an appropriate warning to the user.
Use the Dual Image Configuration page to set the boot image, configure an image
description, or delete an image.
To display the Dual Image Configuration page, click
Maintenance
File Management
Dual
Image
Dual Image Configuration
.
To configure Dual Image settings:
1.
Select the image to configure.
The
Current-active
field displays the name of the active image.
2.
To configure a descriptive name for the selected software image, type the name in the
Image Description
field.
3.
To set the selected image as the active image, select the
Active Image
check box.
Summary of Contents for FS728TP - ProSafe 24 Port 10/100 Smart Switch
Page 8: ...FS728TP Smart Switch Software Administration Manual 8 Table of Contents ...
Page 188: ...188 Chapter 5 Managing Device Security FS728TP Smart Switch Software Administration Manual ...
Page 231: ...Chapter 8 Help 231 FS728TP Smart Switch Software Administration Manual ...
Page 261: ...Index 261 FS728TP Smart Switch Software Administration Manual ...