manualshive.com logo in svg

NETGEAR FS728TP - ProSafe 24 Port 10/100 Smart Switch, Software Administration Manual

Share
Download
NETGEAR FS728TP - ProSafe 24 Port 10/100 Smart Switch Software Administration Manual Download Page 130

130

   

|    

Chapter 4:  Configuring Quality

 of

 Service 

 

FS728TP Smart Switch Software Administration Manual 

Diffserv Configuration

Use the Diffserv Configuration page to display DiffServ General Status Group information, 
which includes the current administrative mode setting as well as the current and maximum 
number of rows in each of the main DiffServ private MIB tables. 

To display the

 

page, click 

QoS 

 DiffServ 

 Advanced 

 Diffserv Configuration

.

To configure the global DiffServ mode:

1. 

Select the administrative mode for DiffServ:

•     

Enable

. Differentiated Services are active.

•     

Disable

. The DiffServ configuration is retained and can be changed, but it is not 

active. 

2. 

Click 

Cancel 

to cancel the configuration on the screen and reset the data on the screen to 

the latest value of the switch.

3. 

If you make changes to the page, click 

Apply

 to apply the changes to the system.

The following table describes the information displayed in the Status table on the DiffServ 
Configuration page:

Field

Description

Class Table

Displays the current and maximum number of rows of the class table.

Class Rule Table

Displays the current and maximum number of rows of the class rule table.

Policy Table

Displays the current and maximum number of rows of the policy table.

Policy Instance Table Displays the current and maximum number of rows of the policy instance table.

Summary of Contents for FS728TP - ProSafe 24 Port 10/100 Smart Switch






































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands