NETGEAR FS728TP - ProSafe 24 Port 10/100 Smart Switch, Software Administration Manual

Page: 160 / 261

160 | Chapter 5: Managing Device Security
FS728TP Smart Switch Software Administration Manual
Port Authentication
In port-based authentication mode, when 802.1X is enabled globally and on the port,
successful authentication of any one supplicant attached to the port results in all users being
able to use the port without restrictions. At any given time, only one supplicant is allowed to
attempt authentication on a port in this mode. Ports in this mode are under bidirectional
control. This is the default authentication mode.
The 802.1X network has three components:
• Authenticators:
Specifies the port that is authenticated before permitting system access.
• Supplicants:
Specifies the host connected to the authenticated port requesting access to
the system services.
• Authentication Server:
Specifies the external server, for example, the RADIUS server
that performs the authentication on behalf of the authenticator, and indicates whether the
user is authorized to access system services.
From the Port Authentication link, you can access the following pages:
•
Basic:
• 802.1X Configuration
on page 160
•
Advanced:
• Port Authentication
on page 161
• Port Summary
on page 165
802.1X Configuration
Use the 802.1X Configuration page to enable or disable port access control on the system.
To display the 802.1X Configuration page, click
Security

Port Authentication

Basic

802.1X Configuration
.