Advanced Settings
57
Broadband ADSL2+ Modem DM111PSPv2
Note:
If your ISP assigns a private WAN IP address such as 192.168.x.x
or 10.x.x.x, the Dynamic DNS service will not work because private
addresses are not routed on the Internet.
LAN Setup
The LAN Setup screen allows configuration of LAN IP services such as DHCP and Routing
Information Protocol (RIP). The modem is shipped preconfigured to use private IP addresses
on the LAN side and to act as a DHCP server. The modem’s default LAN IP configuration is
as follows:
•
LAN IP address
. 192.168.0.1
•
Subnet mask
. 255.255.255.0
These addresses are part of the private address range designated by the Internet
Engineering Task Force (IETF
http://www.ietf.org/
) for use in private networks, and should be
suitable in most applications. If your network has a requirement to use a different IP
addressing scheme, you can make those changes in the LAN Setup screen.
Note:
If you change the LAN IP address of the modem while connected
through the browser, you are disconnected. To reconnect, open a
new connection to the new IP address and log in.
To change the LAN setup:
1.
Select
Advanced >
LAN Setup
.
2.
Enter the LAN Setup configuration, and click
Apply
to save your changes.
