Modem Internet Setup
21
Broadband ADSL2+ Modem DM111PSPv2
Note:
The Setup Wizard cannot detect a Point-to-Point Tunneling Protocol
(PPTP) connection. If your ISP uses PPTP, you have to set your
Internet connection through the screen described in
Manual Setup
(Basic Settings)
described on 21.
Manual Setup (Basic Settings)
The Basic Settings screen displays when you select No. I want to configure the Modem
myself in the Setup Wizard and is also available from the modem menus. It is where you view
or change ISP information. The fields that display vary depending on whether or not your
Internet connection requires a login.
Note:
Check that the country and language are set as described
Setup
Wizard
on page
20 before proceeding with the manual setup.
To perform a manual setup:
1.
Select
Set Up > Basic Settings
, and select
Yes
or
No
depending on whether or not
your ISP requires a login. The following Basic Settings screens show both forms of the
Basic Settings screen.
•
Yes
. Select the encapsulation method and enter the login name. If you want to
change the login time-out, enter a new value in minutes.
•
No
. Enter the account and domain names, as needed.
2.
Enter the settings for the IP address and DNS server. The default DSL settings usually work
fine. If you have problems with your connection, check the DSL settings, and see
ADSL
Settings
on page
24 for more information.
3.
If no login is required, you can specify the MAC Address setting.
4.
Click
Apply
to save your settings.
5.
Click
Test
to test your Internet connection. If the NETGEAR website does not appear within
1 minute, see
Troubleshooting
on page
65.
