NETGEAR DM111PSP-100NAS User Manual Download

Page: 50 / 82

Network Maintenance

Broadband ADSL2+ Modem DM111PSPv2



To view statistics:

From the Router Status screen, click tthe

Show Statistics

button to display a screen similar

to this:

The following fields are displayed:

Port

. The statistics for the WAN (Internet), LAN (local), and wireless LAN (WLAN) ports. For

each port, the screen displays the following:

Status

. The link status of the port.

TxPkts

. The number of packets transmitted since reset or manual clear.

RxPkts

. The number of packets received since reset or manual clear.

Collisions

. The number of collisions since reset or manual clear.

Tx B/s

. The current line utilization—percentage of current bandwidth used.

Rx B/s

. The average line utilization.

Up Time

. The time elapsed since the last power cycle or reset.

ADSL Link Downstream or Upstream

. The statistics for the upstream and downstream DSL

link. These statistics are of interest to your technical support representative if you have
problems obtaining or maintaining a connection.

Connection Speed

. Typically, the downstream speed is faster than the upstream speed.

Line Attenuation

. The line attenuation increases the farther you are physically located from

your ISP’s facilities.

Noise Margin

. The signal-to-noise ratio, which is a measure of the quality of the signal on the

line.

Poll Interva

l. The interval at which the statistics are updated in this window. Click the

Stop

button to freeze the display.

Summary of Contents for DM111PSP-100NAS



















































































Search results

Summary of Contents for DM111PSP-100NAS

Reviews:

Related manuals for DM111PSP-100NAS

Brands by name

Popular brands

NETGEAR DM111PSP-100NAS, User Manual

Search results

Summary of Contents for DM111PSP-100NAS

Reviews:

Related manuals for DM111PSP-100NAS

Brands by name

Popular brands