NETGEAR DM111PSP-100NAS User Manual Download Page 22

Page: 22 / 82

ISP does not require login

ISP does require login

Modem Internet Setup

Broadband ADSL2+ Modem DM111PSPv2

The following descriptions explain all of the possible fields in the Basic Settings screen. Note
that which fields appear in this screen depends on whether or not an ISP login is required.

Does Your ISP Require a Login?

Answer either yes or no.

•

When no login is required, these fields display

Account Name (If required)

. Enter the account name provided by your ISP. This

might also be called the host name.

Domain Name (If required)

. Enter the domain name provided by your ISP.

•

When your ISP requires a login, these fields display

Encapsulation

. Encapsulation is a method for enclosing multiple protocols. PPP

stands for Point-to-Point Protocol. The choices are PPPoE (PPP over Ethernet) or
PPPoA (PPP over ATM).

Login

. The login name provided by your ISP. This is often an email address.

Password

. The password that you use to log in to your ISP.

Summary of Contents for DM111PSP-100NAS



















































































Search results

Summary of Contents for DM111PSP-100NAS

Reviews:

Related manuals for DM111PSP-100NAS

Brands by name

Popular brands

NETGEAR DM111PSP-100NAS, User Manual

Search results

Summary of Contents for DM111PSP-100NAS

Reviews:

Related manuals for DM111PSP-100NAS

Brands by name

Popular brands