NETGEAR CG834WG User Manual Download | Manualshive

Page: 3 / 64

background image

v1.0, October 2007

iii

requirements for electromagnetic compatibility – Article 3.1b. Testing for electromagnetic compatibility according to
EN 301 489-1 and EN 301 489-17 has been conducted. These are considered relevant and sufficient. Effective use of the
radio spectrum – Article 3.2. Testing for radio test suites according to EN 300 328- 2 has been conducted. These are
considered relevant and sufficient.

Bestätigung des Herstellers/Importeurs

Es wird hiermit bestätigt, daß das CG834WG Wireless Cable Modem Gateway gemäß der im BMPT-AmtsblVfg 243/
1991 und Vfg 46/1992 aufgeführten Bestimmungen entstört ist. Das vorschriftsmäßige Betreiben einiger Geräte (z.B.
Testsender) kann jedoch gewissen Beschränkungen unterliegen. Lesen Sie dazu bitte die Anmerkungen in der
Betriebsanleitung.

Das Bundesamt für Zulassungen in der Telekommunikation wurde davon unterrichtet, daß dieses Gerät auf den Markt
gebracht wurde und es ist berechtigt, die Serie auf die Erfüllung der Vorschriften hin zu überprüfen.

Certificate of the Manufacturer/Importer

It is hereby certified that the CG834WG Wireless Cable Modem Gateway has been suppressed in accordance with the
conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example,
test transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please refer to the
notes in the operating instructions.

Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market
and has been granted the right to test the series for compliance with the regulations.

Technical Support

Technical support is available through your Cable Internet Service Provider. Thank you for choosing NETGEAR
product(s).

Product and Publication Details

Model Number:

CG834WG

Publication Date:

October 2007

Product Family:

Gateway

Product Name:

CG834WG Wireless Cable Modem Gateway

Home or Business Product:

Home

Language:

English

Publication Part Number:

202-10330-01

«
1
2
3
4
5
...
»

Summary of Contents for CG834WG

































































Reviews:

No comments

Related manuals for CG834WG

Brand: Optical Systems Design Pages: 20

Brand: ADC Pages: 9

Brand: COM 21 Pages: 23

Brand: ABB Pages: 6

IndustrialPro BT-6600

Brand: red lion Pages: 2

MOBIIBROADBAND 4G

Brand: iiNet Pages: 2

Brand: iiNet Pages: 55

Brand: DeVilbiss Pages: 38

Brand: Black Box Pages: 31

MDS932AE-10BT-R2

Brand: Black Box Pages: 29

Brand: Black Box Pages: 45

Brand: Datatronics Pages: 116

Brand: Technicolor Pages: 85

Brand: CTC Union Pages: 43

Brand: SMC Networks Pages: 100

DM111Pv2 - ADSL2+ Ethernet Modem

Brand: NETGEAR Pages: 26

Brand: FAX Pages: 6

Brand: Zte Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands