NETGEAR AC1200 R6220 User Manual Download Page 74

Page: 74 / 160

Share a Storage Device Attached to the Router

AC1200 Smart WiFi Router with External Antennas

The USB device is added to the Approved USB Devices list.

Select the

Allow only approved devices

check box.

10.

Click the

Apply

button.

Your settings are saved.

11.

To work with another USB device, first click the

Safely Remove USB Device

button for the

currently connected USB device. Connect the other USB device, and repeat this process.

Safely Remove a USB Device

Before you physically disconnect a USB device from the router USB port, log in to the router
and take the drive offline.



To remove a USB disk drive safely:

Launch a web browser from a computer or wireless device that is connected to the
network.

Type

http://www.routerlogin.net

http://www.routerlogin.com

A login screen displays.

Enter the router user name and password.

The user name is

admin

. The default password is

password

. The user name and

password are case-sensitive.

The BASIC Home screen displays.

Select

USB Storage > Basic Settings

The USB Settings screen displays.

Click the

Safely Remove USB Device

button.

This takes the device offline.

Physically disconnect the USB device.

Summary of Contents for AC1200 R6220

































































































































































Search results

Summary of Contents for AC1200 R6220

Reviews:

Related manuals for AC1200 R6220

Brands by name

Popular brands

NETGEAR AC1200 R6220, User Manual

Search results

Summary of Contents for AC1200 R6220

Reviews:

Related manuals for AC1200 R6220

Brands by name

Popular brands