Network Settings
127
AC1200 Smart WiFi Router with External Antennas
The BASIC Home screen displays.
5.
Select
ADVANCED > Advanced Setup > Wireless AP
.
6.
Select the
Enable Access Point Mode
check box.
7.
Scroll down and select an IP address setting:
•
Get dynamically from existing router
. The other router on the network assigns an
IP address to this router while this router is in AP mode.
•
Enable fixed IP settings on this device (not recommended)
. Use this setting if you
want to manually assign a specific IP address to this router while it is in AP mode.
Using this option effectively requires advanced network experience.
Note:
To avoid interference with other routers or gateways in your network,
NETGEAR recommends that you use different wireless settings on
each router. You can also turn off the wireless radio on the other router
or gateway and use the R6220 router only for wireless client access.
8.
Click the
Apply
button.
The IP address of the router changes, and you are disconnected.
9.
To reconnect, close and restart your browser and type
http://www.routerlogin.net
.
