UPM 2000
Netech Corporation
110 Toledo St, Farmingdale, NY 11735
http://www.Netech.org
10
Based on the testing standards below,
this device bears the
mark.
Electromagnetic Interference and Susceptibility
USA FCC CLASS A
Warning: Changes or modifications to this unit not expressly approved by the
manufacturer could void the user's authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. Like all similar equipment, this
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause interference, in which case the user will be
required to correct the interference at his/her own expense.
Canadian Department of Communications Class A
This
digital
apparatus
does
not
exceed
Class
A
limits
for
radio
emissions
from
digital
apparatus
set
out
in
the
Radio
Interference
Regulations
of
the
Canadian
Department
of
Communications.
Emissions - CLASS A
The system has been type tested by an independent, accredited testing laboratory
and found to meet the requirements of EN 61326-1:1998 for Radiated Emissions
and Line Conducted emissions. Verification of compliance was conducted to the
limits and methods of the following:
CISPR 16-1:1993 and CISPR 16-2:1996
1-800-547-6547
