MultiPro 2000 User Manual
27
Save and Print Test Results
Test results can be stored into the memory under the
user specific “ID” and available to be uploaded to a PC
using the serial to USB cable.
Set the device ID (Main Menu), if not set already. Once
the measurement is done press save by pressing F1.
Saving test results in the internal memory
To save the test result Press F1 from the measurement
menu as shown Screen Shot 8
After saving the test results of the DUT’s under test, it
can be uploaded to the PC. All the test results for the
DUT under test is saved under the corresponding ID
number entered in the non volatile memory.
To continue testing of another DUT, make sure to change
the ID number. Otherwise the new test results will be
saved to the previous Equipment ID.
Screen Shot 8
